| Typ/Size |
450
|
750
|
1000
(for production speeds >700/min.)
|
Comments
|
| ES600DC |
ES600DC-450 |
ES600DC-750 |
ES600DC-1000 |
with separate control cabinet
max. cable length between control cabinet and machine = 20 m (60 feet) |
| ES600DCI |
ES600DCI-450 |
ES600DCI-750 |
ES600DCI-1000 |
with integrated control cabinet and air conditioner |
| ES600DCM |
ES600DCM-450 |
ES600DCM-750 |
ES600DCM-1000 |
with DCI controls in separate cabinet
max. cable length between control cabinet and machine = 20 m (60 feet) |
| lehr width |
min. 1300 mm
(4'3") |
min. 1600 mm
(5'3") |
min. 1900 mm
(6'3") |
width of stacker |
| max. 6000 mm (19'8") |
limited by the weight of the push bar |
| transversal speed |
min. 1 mm/s (0.04"/s |
|
max. 800 (1200) mm/s
31 ½ (47 ¼) inch/s |
max. 1200 mm/s
47 ¼ inch/s |
(1200) = if required the servo axis controller will be programmed accordingly |
| motion laws |
MS (modified sinoide) dwell - speed - dwell
CYC (cycloidal) speed - speed |
max acceleration at low speed, resulting in optimal ware handling and low energy consumption |
strokes
driven by AC servomotors with pinion and rack |
transversal 450 mm
(17 ½") |
transversal 750 mm
(30") |
transversal 1000 mm
(39 ¼") |
|
| longitudinal 450 mm (19 5/8") |
|
| lift 500 mm (39 ¼") |
20° with 1460 mm (57½") distance between the hinge point and the push bar |
| stabiliser bar 230 mm (9") |
integrated in lift arm |
| lubrication system |
automatic and programmable |
type Lincoln |
| stacking alternate rows |
yes |
change on running machine possible |
| operating panel at stacker |
yes |
job change and full programming with separate PC |
| motion profile programmable directly on stacker |
yes |
stacker type DCI and DCM are equipped for networking |
| storage of motion profiles |
yes |
number of different jobs not limited |
ES600 DC 5900-901a